FixVault
Home › Hyundai › 2013 › Veloster Base, Standard Trans › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia panel assembly (A).
    Fig 1: Center Fascia Panel Assembly
    G09135392Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector after loosening 2 screws, and then remove the start/stop button (A).
    Fig 2: Start/Stop Button And Mounting Screws
    G09135393Courtesy of HYUNDAI MOTOR AMERICA
About FixVault