Repair Procedures: Disassembly

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Remove the alternator cover (A) using a screw driver after loosening the nuts (B).

Fig 1: Identifying Alternator Cover And Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the slip ring guide (A) and then loosen the mounting bolts and disconnect the brush holder assembly (B).

Fig 2: Identifying Slip Ring Guide And Brush Holder Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the pulley (A) using the SST (09373-27000) (B).

Fig 3: Removing Pulley Using SST
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the 4 through bolts (A).

Fig 4: Identifying Through Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rotor (A) and cover (B).

Fig 5: Identifying Rotor And Cover
Courtesy of HYUNDAI MOTOR AMERICA
Reassembly is the reverse order of disassembly.