Power Window Main Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim panel.
(Refer to "FRONT DOOR ")
Disconnect the connector from the switch.

Fig 1: Power Window Main Switch And Connector Terminal Identification
Courtesy of HYUNDAI MOTOR AMERICA
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Power Window Main Switch Connector Terminal Continuity Table
Courtesy of HYUNDAI MOTOR AMERICA

[Manual]

Fig 3: Power Window Main Switch Connector Terminal Continuity Table (Manual)
Courtesy of HYUNDAI MOTOR AMERICA

[Auto Down]

Fig 4: Power Window Main Switch Connector Terminal Continuity Table (Auto Down)
Courtesy of HYUNDAI MOTOR AMERICA

[Safety Up/Down]

Fig 5: Power Window Main Switch Connector Terminal Continuity Table (Safety Up/Down)
Courtesy of HYUNDAI MOTOR AMERICA