FixVault
Home › Hyundai › 2014 › Elantra Coupe Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Crankshaft Position Sensor (CKPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
    Fig 1: Crankshaft Position Sensor Connector
    G10255716Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Crankshaft Position Sensor Bolt
    G10255717Courtesy of HYUNDAI MOTOR AMERICA
About FixVault