FixVault
Home › Hyundai › 2014 › Elantra Coupe Standard Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Body Control Module (BCM) › Body Control Module › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the console. (Refer to "CONSOLE ")
  3. Remove the audio and heater/air conditioner controller. (Refer to "CRASH PAD ")
  4. Remove the lower panel and glove box. (Refer to "CRASH PAD ")
  5. Remove the BCM unit (A) after disconnecting a connector and loosening 2 nuts.
    Fig 1: BCM Unit
    G10254698Courtesy of HYUNDAI MOTOR AMERICA
  6. The installation is the reverse order of removal.
About FixVault