DTC Information: DTC Detecting Condition
| Item | Detecting Condition | Possible Cause |
|---|---|---|
| DTC Strategy | * Signal check, high | 1. Poor connection 2. Open or short to ground in power circuit 3. Open in control circuit 4. S2 |
| Enable Conditions | * Battery voltage is higher than 10.7V and lower than 16V | |
| * Exhaust Gas temperature is higher than 350°C (662°F) and lower than 550°C (1022°F) | ||
| Threshold Value | * When Internal resistance is greater than threshold value (Calculated by exhaust gas temp. or heating power) | |
| Diagnostic Time | * 15 sec | |
| MIL ON Condition | * 2 driving cycle |