Repair Procedures: Removal

Disconnect the battery negative terminal.
Remove the air duct and air cleaner assembly. (Refer to REMOVAL )
2013
Disconnect the starter cable (B) from the B terminal on the solenoid then disconnect the connector from the S terminal (A).

Fig 1: Starter Cable Terminals - 2013
Courtesy of HYUNDAI MOTOR AMERICA

2014

Disconnect the starter cable (A) from the B terminal on the solenoid then disconnect the connector from the S terminal (B).

Fig 2: Starter Cable Terminals - 2014
Courtesy of HYUNDAI MOTOR AMERICA
Remove the 2 bolts holding the starter, then remove the starter (A).

Fig 3: Starter Bolts
Courtesy of HYUNDAI MOTOR AMERICA