Repair Procedures: Replacement

Remove the Engine cover. (Refer to REMOVAL )
Remove the Air cleaner assembly and air duct. (Refer to REMOVAL )
Remove the Battery and battery tray. (Refer to REMOVAL )
Disconnect the back up lamp switch connector (A).

Fig 1: Back Up Lamp Switch Connector (A)

G00558258

Courtesy of HYUNDAI MOTOR AMERICA

Remove the back up lamp switch (A).
Replace a new one and install the back up lamp switch

Fig 2: Identifying Back Up Lamp Switch

G00558270

Courtesy of HYUNDAI MOTOR AMERICA

Tightening torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

Install in the reverse order of removal.