Hub Bolt Replacement

WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.

Required Special Tools:

MB991618: Hub Bolt Remover
MB990767: Front Hub and Flange Yoke Holder

Remove the brake caliper assembly and brake disc, and retain the brake caliper assembly with a wire and the like to prevent from falling (Refer to FRONT AXLE HUB ASSEMBLY ).
Use special tool MB991618 to remove the hub bolts.

Fig 1: Identifying Hub Bolt And Special Tool (MB991618)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the plain washer to the new hub bolt, and install the bolt with a nut while holding the hub with special tool MB990767.
Install the brake disc and the brake caliper assembly (Refer to FRONT AXLE HUB ASSEMBLY ).

Fig 2: Installing Brake Disc And Brake Caliper Assembly
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.