FixVault
Home › Hyundai › 2014 › Genesis 3.8 › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › ESCL (Electronic Steering Column Lock) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative(-) battery terminal.
  2. Remove the crash pad lower panel (A). (Refer to "CRASH PAD ")
    Fig 1: Identifying Crash Pad Lower Panel
    G08838848Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the electronic steering column lock connector (A).
    Fig 2: Identifying Electronic Steering Column Lock Connector
    G08838849Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the electronic steering column lock (A). (Refer to Steering system - "STEERING COLUMN AND SHAFT ")
    Fig 3: Identifying Electronic Steering Column Lock
    G08838850Courtesy of HYUNDAI MOTOR AMERICA
About FixVault