FixVault
Home › Hyundai › 2014 › Genesis 5.0 R-Spec › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Canister Close Valve (CCV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the service cover (A).
    Fig 1: Service Cover
    G08822926Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the vapor hose (B) from the canister.
  5. Remove the installation bolt.
  6. Remove the canister close valve from the fuel tank air filter.
    Fig 2: Canister Close Valve Connector, Vapor Hose And Installation Bolt
    G08822927Courtesy of HYUNDAI MOTOR AMERICA
About FixVault