FixVault
Home › Hyundai › 2014 › Genesis Coupe 3.8 R-Spec, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Fuel Pump Resister › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the fuel pump resister connector.
  3. Remove the fuel pump resister (A) after removing the installation bolts (B).
    Fig 1: Identifying Fuel Pump Resister & Installation Bolts
    G00540703Courtesy of HYUNDAI MOTOR CO.
About FixVault