FixVault
Home › Hyundai › 2014 › Genesis Coupe 3.8 R-Spec, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Injector Drive Box (IDB) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch off and disconnect the battery negative (-) cable.
  2. Disconnect the injector drive box (IDB) connector (A).
    Fig 1: Identifying Injector Drive Box (IDB) Connector
    G00540430Courtesy of HYUNDAI MOTOR CO.
  3. Remove the left side head lamp. (Refer to Head Lamps )
  4. Remove the IDB assembly after removing the bolts (A) and the nuts (B).
    Fig 2: Identifying IDB Assembly Bolts & Nuts
    G00540431Courtesy of HYUNDAI MOTOR CO.
About FixVault