[CVVT Oil Control Valve (Intake)]

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Remove the intake manifold.
(Refer to "INTAKE MANIFOLD ")
Disconnect the CVVT oil control valve connector (A).
Remove the installation bolt (B), and then remove the valve from the engine.
[Bank 1]

Fig 1: Identifying CVVT Oil Control Valve Connector And Mounting Bolt (Bank 1)
Courtesy of HYUNDAI MOTOR AMERICA

[Bank 2]

Fig 2: Identifying CVVT Oil Control Valve Connector And Mounting Bolt (Bank 2)
Courtesy of HYUNDAI MOTOR AMERICA