FixVault
Home › Hyundai › 2014 › Sonata Hybrid Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (HEV) › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Identifying Crankshaft Position Sensor (CKPS) Connector
    G07744124Courtesy of HYUNDAI MOTOR CO.
  3. Remove the protector (A).
    Fig 2: Identifying Protector
    G07744125Courtesy of HYUNDAI MOTOR CO.
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
    Fig 3: Identifying Crankshaft Position Sensor (CKPS) Installation Bolt
    G07744126Courtesy of HYUNDAI MOTOR CO.
About FixVault