FixVault
Home › Hyundai › 2014 › Tucson GLS, 4WD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control Module (BCM) › Body Control Module (BCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center facia panel.

    (Refer to CRASH PAD - "Crash pad center panel".)

  3. Loosen the nut and bolt from BCM.
  4. Disconnect the connectors (A).
    Fig 1: Removing/Installing BCM
    G00546882Courtesy of HYUNDAI MOTOR CO.
About FixVault