Front Brake Pads

WARNING: This page is about a different car, the 2013 Hyundai Tucson and 2012 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.

Remove the brake hose mounting bracket bolt (A).

Fig 1: Identifying Brake Hose Mounting Bracket Bolt
Courtesy of HYUNDAI MOTOR CO.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Tightening torque:

21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)

Fig 2: Identifying Caliper With Guide Rod Bolt
Courtesy of HYUNDAI MOTOR CO.
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper bracket (A).

Fig 3: Identifying Caliper Bracket With Brake Pad, Retainer And Shim
Courtesy of HYUNDAI MOTOR CO.