FixVault
Home › Hyundai › 2014 › Tucson Limited, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Canister Close Valve (CCV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B, C) from the fuel tank air filter and canister close valve.
    Fig 1: Identifying Canister Close Valve Connector And Ventilation Hose
    G09802383Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the fuel tank air filter and canister close valve assembly (A) after removing the mounting nut (B).
    Fig 2: Identifying Canister Close Valve Assembly & Mounting Nut
    G09802384Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter (C) after rotating it in the direction of the arrow in the figure.
    Fig 3: Identifying Canister Close Valve Lever
    G09802385Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Separating Canister Close Valve From Fuel Tank Air Filter
    G09802386Courtesy of HYUNDAI MOTOR AMERICA
About FixVault