Removal and Installation

Disconnect the battery negative terminal.
Remove the driver airbag module.
(Refer to REMOVAL " ")
Remove the steering wheel.
(Refer to "STEERING COLUMN AND SHAFT ")
Remove the steering wheel cover (A) after loosening the screws.

Fig 1: Identifying Steering Wheel Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the audio switch connector (A).

Fig 2: Identifying Audio Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the cruise control switch connector (A) and the trip switch connector (B).

Fig 3: Identifying Cruise Control Switch Connector And Trip Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the wiring (A) and then loosen the screws.

Fig 4: Identifying Steering Wheel Wiring
Courtesy of HYUNDAI MOTOR AMERICA
Remove the steering wheel remote control switch assembly (A).

Fig 5: Identifying Steering Wheel Remote Control Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the cruise control switch (A).

Fig 6: Identifying Cruise Control Switch
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Be careful not to damage the hook when removing the switch.
Installation is reverse order of removal.