Repair procedures: Removal

Release the residual pressure in fuel line (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
Remove the rear seat [LH] (Refer to "REAR SEAT ").
Remove the fuel pump service cover (A).

Fig 1: Fuel Pump Service Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel pump connector (A).
Disconnect the fuel feed tube quick connector (B).
Disconnect the fuel tank pressure sensor connector (C).
Disconnect the vapor tube (D).

Fig 2: Fuel Pump Connector, Fuel Feed Tube Quick Connector, Fuel Tank Pressure Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Lift the vehicle and support the fuel tank with a jack.
Remove the center muffler assembly (Refer to "INTAKE AND EXHAUST SYSTEM ").
Disconnect the fuel filler hose (A) and the vapor hose (B).

Fig 3: Fuel Filler Hose And Vapor Hose
Courtesy of HYUNDAI MOTOR AMERICA
Remove the parking brake line installation bolt (A).

Fig 4: Parking Brake Line Installation Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the fuel tank from the vehicle after removing the fuel tank band (A).

Fig 5: Fuel Tank And Fuel Tank Band

Courtesy of HYUNDAI MOTOR AMERICA