FixVault
Home › Hyundai › 2015 › Accent GS, Automatic Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System › Accelerator Pedal › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B), and then remove the accelerator pedal module.
Fig 1: Accelerator Position Sensor Connector And Installation Nuts
G10362531Courtesy of HYUNDAI MOTOR AMERICA
About FixVault