FixVault
Home › Hyundai › 2015 › Azera Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Blower System › Intake Actuator › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    (Refer to "MAIN CRASH PAD ASSEMBLY ")

  3. Disconnect the Intake actuator connector (A).
  4. Loosen the mounting screw and then remove the intake actuator (B).
    Fig 1: Intake Actuator Connector And Intake Actuator
    G10369872Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse order of removal.
About FixVault