FixVault
Home › Hyundai › 2015 › Elantra Coupe GLS, Standard Trans › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to: "INTAKE & EXHAUST SYSTEM " in EM procedure).
  3. Disconnect the ETC module connector (A).
    Fig 1: Disconnecting ETC Module Connector
    G10548884Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the Engine.
    Fig 2: Removing Installation Bolts And Coolant Hoses
    G10548885Courtesy of HYUNDAI MOTOR AMERICA
About FixVault