FixVault
Home › Hyundai › 2015 › Elantra Coupe GLS, Standard Trans › Repair and Diagnosis › Engine Performance › System › Engine Control System - 1.8L › Variable Charge Motion Actuator (VCMA) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Disconnecting VCMA Connector
    G10548964Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Removing VCMA
    G10548965Courtesy of HYUNDAI MOTOR AMERICA
About FixVault