Repair Procedures: Installation

Installation is the reverse of removal.
NOTE:
- Replace the gasket (A) before reinstalling the valve body cover.
- Adding automatic transaxle fluid.
  (Refer to: Hydraulic System - "FLUID " in this procedure).
  
  Fig 1: Valve Body Cover Gasket
  Courtesy of HYUNDAI MOTOR AMERICA
- Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup.
  (Refer to: "AUTOMATIC TRANSAXLE CONTROL SYSTEM (REPAIR PROCEDURES) " in this procedure).