FixVault
Home › Hyundai › 2015 › Elantra SE, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.8L › Variable Charge Motion Actuator (VCMA) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Identifying VCMA Connector
    G10537735Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Identifying VCMA Installation Bolts
    G10537736Courtesy of HYUNDAI MOTOR AMERICA
About FixVault