FixVault
Home › Hyundai › 2015 › Genesis 5.0 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 5.0L › Electronic Throttle Control (ETC) System › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
    Fig 1: ETC Module Connector And Coolant Hoses
    G10465231Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the installation bolts (A), and then remove the ETC module (B) from the engine.
    Fig 2: ETC Module Mounting Bolts
    G10465232Courtesy of HYUNDAI MOTOR AMERICA
About FixVault