FixVault
Home › Hyundai › 2015 › Santa Fe Sport Base, AWD › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control Module (BCM) › BCM (Body Control Module) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center panel.

    (Refer to: Body - "Crash Pad Center Panel").

  3. Disconnect the body control module connectors (A).
    Fig 1: Body Control Module Connectors (1 Of 2)
    G10584530Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the body control module (A) after loosening the nuts.
Fig 2: Body Control Module Nuts (2 Of 2)
G10584531Courtesy of HYUNDAI MOTOR AMERICA
About FixVault