FixVault
Home › Hyundai › 2015 › Sonata Limited 2.0T › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L (Except HEV) › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Accelerator Position Sensor Connector Location
    G10573381Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the mounting cap (A).
    Fig 2: Mounting Cap Location
    G10573382Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolt (A), and then remove the accelerator pedal module.
    Fig 3: Accelerator Pedal Module Installation Bolt Location
    G10573383Courtesy of HYUNDAI MOTOR AMERICA
About FixVault