Roof Trim Assembly Replacement

NOTE:

Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend or scratch the trim and panels.

Remove the following items.
1. Sunvisor.
2. Overhead console.
3. Room lamp.
4. Assist handle.
Disconnect the cover (A) and ECM room mirror connector (B).

Fig 1: Identifying ECM Room Mirror Connector And Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the cover (A) and rain sensor connector (B).

Fig 2: Identifying Rain Sensor Connector And Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the wiring connector (A), mounting clips.
[Driver's]

Fig 3: Identifying Driver Wiring Connector
Courtesy of HYUNDAI MOTOR AMERICA

[Passenger's]

Fig 4: Identifying Passenger Wiring Connector
Courtesy of HYUNDAI MOTOR AMERICA
Push the lower anchor (A) of second row seat belt into the second center row seat belt cover.

Fig 5: Identifying Lower Anchor
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the antenna connector (A).

Fig 6: Identifying Antenna Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (B).
Disconnect the clips and then remove the roof trim (A).

Fig 7: Identifying Roof Trim & Connector
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
NOTE:
- Replace any damage clips.