FixVault
Home › Hyundai › 2015 › Tucson GLS, FWD › Repair and Diagnosis › Engine Performance › Ignition System › Ignition System - 2.0L › Ignition Coil › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the battery negative (-) terminal.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connectors (A).
    Fig 1: Ignition Coil Connectors
    G10611300Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
    Fig 2: Pulling Lock Pin
    G10611301Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coil (A).
Fig 3: Ignition Coils
G10611302Courtesy of HYUNDAI MOTOR AMERICA
About FixVault