Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.
NOTE:
- Replace the valve body gasket (A) before reinstalling the valve body cover.
  
  Fig 1: Valve Body Gasket
  Courtesy of HYUNDAI MOTOR AMERICA
- Adding automatic transaxle fluid.
  (Refer to Hydraulic system - "FLUID ")
- Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup.
  (Refer to Automatic transaxle control system - "REPAIR PROCEDURES ")