FixVault
Home › Hyundai › 2015 › Veloster Base, Standard Trans › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the Center Fascia Panel Assembly (A).
    Fig 1: Center Fascia Panel Assembly
    G10606133Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector after loosening 2 Screws and then remove the Start/Stop Button (A).
    Fig 2: Loosening Start/Stop Button Connector Screws
    G10606134Courtesy of HYUNDAI MOTOR AMERICA
About FixVault