When The TPMS Warning Lamp ON
WARNING: This page is about a different car, the 2016 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the TMK repaired tire, wheel and TPMS sensor.
(Refer to: "Tire Removal").
- Remove the sealant on the wheel and TPMS sensor (A) completely.CAUTION:
- Clean the sealant on the housing and sensing hole of TPMS sensor with clean cloth, gauze or air inhalers.
- To prevent the sensor and circuit board damage, do not use the pointed instrument and give a lot of impact.
- Install the TPMS sensor to the new tire.
- Check the tire pressure using the electrical tire pressure gauge.
- Check the tire pressure of TPMS sensor using the GDS
- If the difference between two checked pressures in the above is not more than 2 psi, TPMS sensor is normal. Reinstall it to new tire.
- If the difference between two checked pressures in the above is more than 2 psi, TPMS sensor is abnormal. Install new TPMS sensor to new tire.
- Check that the normal operation of TPMS system.