Repair Procedures: Installation

Install in the reverse order of removal.
Adjust the Alternator Belt Tension after installation.
(Refer to: Engine Mechanical System - "DRIVE BELT ").

Alternator Installation Bolt:

[12mm (0.47in) Bolt]

19.6 ~ 26.5 Nm (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

[14mm (0.55in) Bolt]

29.4 ~ 41.2 Nm (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 lb-ft)