FixVault
Home › Hyundai › 2015 › Veloster Turbo, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Crankshaft Position Sensor Connector (A) and remove the Sensor (B) after removing the Installation Bolt.
Fig 1: Crankshaft Position Sensor And Connector
G10604557Courtesy of HYUNDAI MOTOR AMERICA
About FixVault