FixVault
Home › Hyundai › 2015 › Veloster Turbo, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Remove the Resonator and the Air Intake Hose.

    (Refer to: Engine Mechanical System - "AIR CLEANER ").

  3. Disconnect the ETC Module Connector (A).
    Fig 1: ETC Module Connector Location
    G10604527Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the Installation Bolts, and then remove the ETC Module (A) from the Engine.
Fig 2: ETC Module With Installation Bolts Location
G10604528Courtesy of HYUNDAI MOTOR AMERICA
About FixVault