FixVault
Home › Hyundai › 2015 › Veloster Turbo, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Fuel Pressure Control Valve › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Fuel Pressure Regulator Valve Connector.
  3. Measure resistance between the Fuel Pressure Regulator Valve Terminals 1 and 2.
  4. Check that the resistance is within the Specification.

    Specification:  Refer to: "SPECIFICATION ".

About FixVault