FixVault
Home › Hyundai › 2015 › Veloster Turbo, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Purge Control Solenoid Valve (PCSV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Purge Control Solenoid Valve Connector (A).
  3. Disconnect the Vapor Hoses (B) from the Purge Control Solenoid Valve.
  4. Remove the Installation Bolt (C), and then remove the PCSV (D) from the Engine.
Fig 1: Purge Control Solenoid Valve Connector, Vapor Hoses, Installation Bolt And PCSV Location
G10604605Courtesy of HYUNDAI MOTOR AMERICA
About FixVault