FixVault
Home › Hyundai › 2015 › Veloster Turbo, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Waste Gate Solenoid Valve (WGV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Waste Gate Solenoid Valve Connector (A).
  3. Disconnect the Vapor Hoses (B) from the Waste Gate Solenoid Valve.
  4. Remove the Valve after removing the Bolt (C).
  5. Remove the Waste Gate Solenoid Valve (D).
Fig 1: Waste Gate Solenoid Valve, Connector, Vapor Hoses And Bolt
G10604614Courtesy of HYUNDAI MOTOR AMERICA
About FixVault