FixVault
Home › Hyundai › 2015 › Veloster Turbo, Automatic Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 11 (Engine Control System - 1.6L GDI) › CVVT Oil Control Valve (OCV) › Repair Procedures › Removal › Notes

Repair Procedures: Removal: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the CVVT Oil Control Valve Connector (A).
  3. Remove the Installation Bolt (B), and then remove the valve from the Engine.
About FixVault