FixVault
Home › Hyundai › 2016 › Azera Base › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis (3 Of 3) › DTC P2106: Limp Home Mode - Force Limited Power › General Information › DTC Detecting Condition

General Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • This code detects if the system is in Limit Performance Mode
  1. Faulty APS
  2. Faulty APS + Brake
  3. Faulty APS + Vehicle speed sensor
  4. Faulty APS + Vehicle speed sensor + Brake
  5. Faulty PCM
Enable Conditions
  • Ignition "ON"
Threshold value
  • Limit Performance Mode is active
Diagnosis Time
  • -
MIL On Condition
  • 1 Drive Cycle

* If Main relay has a fault (ex. Open) under engine running, the DTCs, P0638/P0685/P1295/P2106, can happen at the same time.

About FixVault