FixVault
Home › Hyundai › 2016 › Azera Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heater System › Mode Control Actuator › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad left side cover (A).
    Fig 1: Crash Pad Left Side Cover
    G10369850Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the extension cover (A).
    Fig 2: Extension Cover
    G10369851Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fuse box cover (A).
    Fig 3: Identifying Fuse Box Cover
    G10369852Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the crash pad lower cover (A).
    Fig 4: Crash Pad Lower Cover
    G10369853Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the diagnosis connector (A) and then remove the crash pad lower cover.
    Fig 5: Disconnecting Diagnosis Connector
    G10369854Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the shower duct (A).
    Fig 6: Shower Duct
    G10369855Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the mode control actuator connector (A).
    Fig 7: Mode Control Actuator And Connector
    G10369856Courtesy of HYUNDAI MOTOR AMERICA
  9. Loosen the mounting screw and then remove the mode control actuator (B).
  10. Installation is the reverse order of removal.
About FixVault