FixVault
Home › Hyundai › 2016 › Azera Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Heater System › Temperature Control Actuator › Repair Procedures › Replacement › Driver Temperature Control Actuator

Driver Temperature Control Actuator

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad left side cover (A).
    Fig 1: Crash Pad Left Side Cover
    G10369833Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the extension cover (A).
    Fig 2: Extension Cover
    G10369834Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the fuse box cover (A).
    Fig 3: Fuse Box Cover
    G10369835Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the crash pad lower cover (A).
    Fig 4: Crash Pad Lower Cover
    G10369836Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the diagnosis connector (A) and then remove the crash pad lower cover (B).
    Fig 5: Diagnosis Connector And Crash Pad Lower Cover
    G10369837Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the shower duct (A).
    Fig 6: Shower Duct
    G10369838Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the BCM.

    (Refer to "BODY CONTROL MODULE (BCM) ")

  9. Disconnect the temperature control actuator connector (A).
    Fig 7: Temperature Control Actuator And Connector
    G10369839Courtesy of HYUNDAI MOTOR AMERICA
  10. Loosen the mounting screw and then remove the temperature control actuator (B).
About FixVault