Repair procedures: Replacement

Remove the front seat belt upper anchor.
(Refer to "FRONT SEAT BELT PRETENSIONER ")
After loosening the bolts, then remove the height adjustor (A).
Tightening torque:

39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

Fig 1: Height Adjustor And Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Replace any damaged clips.
- Make sure the connector is plugged in properly.