FixVault
Home › Hyundai › 2016 › Elantra GT Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Identifying Crankshaft Position Sensor Connector
G10749870Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Identifying Crankshaft Position Sensor Bolt
G10749871Courtesy of HYUNDAI MOTOR AMERICA
About FixVault