FixVault
Home › Hyundai › 2016 › Elantra GT Automatic Trans › Repair and Diagnosis › Transmission › Manual Trans › Manual Transaxle System › Back-Up Lamp Switch › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Disconnect the back up lamp switch connector (A).
    Fig 1: Disconnecting Back Up Lamp Switch Connector
    G10750095Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
    Fig 2: Checking Continuity Between Backup Lamp Switch Terminals 1 And 2
    G10750096Courtesy of HYUNDAI MOTOR AMERICA
About FixVault