Repair Procedures: Replacement

Remove the following parts;
1. Engine cover
  (Refer to: Engine Mechanical System - "ENGINE COVER ").
2. Air cleaner assembly and air duct
  (Refer to: Engine Mechanical System - "AIR CLEANER ").
3. Battery and battery tray
  (Refer to: Engine Electrical System - "BATTERY ").
Disconnect the back up lamp switch connector (A).

Fig 1: Identifying Back Up Lamp Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the back up lamp switch (A).

Fig 2: Identifying Back Up Lamp Switch
Courtesy of HYUNDAI MOTOR AMERICA
Replace a new one and install the back up lamp switch.
Tightening Torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)