Repair Procedures: Removal

Remove the battery.
(Refer to: Engine Electrical System - "BATTERY ").
Disconnect the vehicle speed sensor (A).

Fig 1: Identifying Vehicle Speed Sensor
Courtesy of HYUNDAI MOTOR AMERICA
Remove the vehicle speed sensor (A).
Tightening Torque:

5.9 ~ 7.8 N.m (0.6 ~ 0.8 kgf.m, 4.3 ~ 5.8 lb-ft)

Fig 2: Removing Vehicle Speed Sensor
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- After removing speed sensor, be careful not to enter dust, foreign matters, etc. in speed sensor hole.
- Check the wear of spline (A).
- When installing, do not reuse the O-ring (B).
Fig 3: Installing O-Ring
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.