Repair Procedures: Removal

Disconnect the negative (-) Battery terminal.
Remove the heater & A/C controller unit.
(Refer to: Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual) ").

(Refer to: Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC) ").
Remove the center lower cover (A).

Fig 1: Identifying Center Lower Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the BCM mounting nuts (A).

Fig 2: Identifying BCM Mounting Nut (RH)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Identifying BCM Mounting Nut (LH)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the BCM unit (B) after disconnecting the connector (A).

Fig 4: Identifying BCM Unit Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 5: Identifying BCM Unit And Connector
Courtesy of HYUNDAI MOTOR AMERICA